Product Description The Opentrons HEPA (High Efficiency Particulate Air) module is a positive pressure clean air system liquid handling robot for use with the Opentrons OT-2. The HEPA module introduces a continuous flow of filtered air into the OT-2 enclosure, expelling contaminants and providing a positive pressure air boundary to prevent the introduction of airborne contaminants.

NOTE: HEPA modules are not biosafety cabinets and should never be used with pathogens. It should not be used in situations where there are volatile or any potentially hazardous aerosolized materials.

Device Ratings Intended Use of the Device The intended use of the HEPA module is the optional device Opentrons OT-2. It is designed to purify the air of the OT-2 workspace using a HEPA filter to reduce the number of particles in the workspace. A filter fan continuously moves air through the workspace and exhausts it through the sides of the OT-2 to keep the workspace clean.

Safety information and regulatory compliance

HEPA modules are designed for use only with Opentrons hardware. Lifting or Carrying Instructions These instructions are critical to preventing injury. Lifting may occur during these steps: ? Unboxing ? Separating the top and bottom of the HEPA unit ? Place the HEPA module on top of the OT-2 ? Replacing the HEPA filter safety warning labels Warning labels posted on Opentrons HEPA modules and in this document The warning label manual warns you of potential harm or sources of harm. Each safety warning label is referenced in One Key Sheet 2.

Original address: User Manual: HEPA Module< /strong>